Salient Features

• Made from high grade special alloy steel.
• Taparia Files are designed with precise teeth geometry to efficiently remove stock through abrasion & achieving the desired finish across various shapes & materials.
• Scientifically heat - treated to give maximum strength, wear resistance.
• Surface treated to protect from rust/corrosion.
• A new file should be used with light pressure in the beginning, preferable on surface which has been filed earlier. 
• In case of clogging of file teeth, clean the teeth with a soft metal wire brush.
  
  

Available in vide variety of sizes, shapes, cuts and tooth configurations

Type / Shapes	Sizes (in mm)	Cuts
Machinist Files / Engineer's Files	Machinist Files / Engineer's Files	Machinist Files / Engineer's Files
Round Files	100, 150, 200, 250, 300, 350	Bastard, Second & Smooth
Hand Files	100, 150, 200, 250, 300, 350	Bastard, Second & Smooth
Round Files	100, 150, 200, 250, 300, 350	Bastard, Second & Smooth
Half Round Files	100, 150, 200, 250, 300, 350	Bastard, Second & Smooth
Three Square	100, 150, 200, 250, 300, 350	Bastard, Second & Smooth
Square	100, 150, 200, 250, 300, 350	Bastard, Second & Smooth
Knife Edge	100, 150, 200, 250, 300	Bastard
Pillar Narrow	150, 200	Bastard
Flat Handle	250	Bastard, Second
Warding	100, 150, 200	Bastard
Flat Super light	250	Bastard

Saw Files

Type / Shapes	Sizes (in mm)	Cuts
Feather Edge	125, 150	Second
Pit Saw	110	Second
Heavy Taper	100, 125,150, 200	Second
Regular Taper	100, 125,150	Second
Slim Taper	100, 125,150	Second
Mill Files	100, 150, 200, 250, 300, 350	Bastard


Needle Files

Type / Shapes	Sizes (in mm)	Cuts
Flat Files	140, 160	‘0’ Cut
Round Files	140, 160	‘0’ Cut
Half Round Files	140, 160	‘0’ Cut
Three Square	140, 160	‘0’ Cut
Square	140, 160	‘0’ Cut
Knife Edge	140, 160	‘0’ Cut




Type / Shapes	Sizes (in mm)	Cuts
Wood Rasp
Flat Wood Rasp	150, 200, 250	Bastard, Second & Smooth
Flat Wood Rasp	300, 350	Bastard
Half Round Wood Rasp	150, 200, 250	Bastard, Second & Smooth
Half Round Wood Rasp	300, 350	Bastard


TAPARIA Files are generally Conform to I.S. 1931 :2000, 3587 : 1986 & 3152-1980.