• TAPARIA Bits are manufactured from special-grade alloy steel.
• Scientifically heat-treated to provide maximum strength and wear resistance.
• Offer 30% higher wear resistance and torque compared to bits made from Cr-V steel.
• Precision-machined tips ensure a firm grip in the screw slot.
• Special coating and rust-prevention oil provide effective corrosion protection.
• Available with a 1/4" hexagonal drive in lengths of 25 mm, 50 mm, 65 mm, and 110 mm.
  
  

Available Tip Profiles

A. Flat: 3 × 0.5, 4 × 0.6, 5 × 0.8, 6 × 1.0, and 8 × 1.2 mm.

B. Hexagon:

Metric Series (A/F): 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm.

Inch Series (A/F): 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, and 1/4 inch.

C. Phillips: 0, 1, 2, and 3.

D. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, and T45.

E. Double-Headed Bits: PH1 × PH1, PH1 × PH2, PH1 × PH3, PH2 × PH2, PH2 × PH3, and PH3 × PH3.

F. Two-in-One Screwdriver Bits: PH2 × SL6 mm, PH1 × SL4.5 mm, PH2 × SL5.5 mm, and PH3 × SL6.5 mm.

G. Pozi Drive: PZ1 and PZ2.

Bit Sets

1. BDS125 Includes 10 Torx, Phillips, and Flat bits with a bit driver.

2. BDST Includes 10 Torx bits with a bit driver.

3. BDSPF Includes 9 Phillips and Flat bits with a bit driver.

4. BS 80 Includes 79 Torx, Phillips, Hex, and Flat bits, along with an adapter and bit holder, supplied with a ratchet bit driver.

5. PBS32 Includes 32 Torx, Phillips, Hex, and Flat bits, supplied with a quick-release bit holder.

6. BS 31 Includes 31 Torx, Phillips, Hex, Tri-Wing, Square, and Flat bits, supplied with a TPR handle.

TAPARIA Flat and Phillips screwdriver bits generally conform to IS 12168 Part II.

TAPARIA Hex screwdriver bits generally conform to IS 12481.